您的位置: 标准下载 » 国内标准 » 行业标准 »

JJF 1061-1999 税控燃油加油机制造许可证考核规范

时间:2024-04-29 03:27:08 来源: 标准资料网 作者:标准资料网 阅读:9361
下载地址: 点击此处下载
基本信息
标准名称:税控燃油加油机制造许可证考核规范
英文名称:The Examination Specification of Manufacturing Competence for Fuel Dispensers with Revenue Function
中标分类:
发布部门:国家质量技术监督局
发布日期:1999-08-17
实施日期:1999-10-01
首发日期:
作废日期:
归口单位:全国容量流量计量技术委员会
起草单位:国家质量技术监督局计量司、北京市计量测试所、北京长吉加油设备有限公司
起草人:王子钢、关慎敏、张伯南
出版社:中国计量出版社
出版日期:2004-04-22
页数:16页
书号:155026-1072
适用范围

本规范适用于申请税控燃油加油机制造许可证的考核、监督检查和复查。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类:
MIL-HDBK-199A, DEPARTMENT OF DEFENSE HANDBOOK: RESISTORS, SELECTION AND USE OF (24 AUG 2004)., This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply. This handbook consists of the following: a. Selected standard resistor types, for use in the design and manufacturer of Department of Defense equipment under the jurisdiction of the Department of Defense. b. Guides for the choice and application of resistors for use in Department of Defense equipment. Requirements for resistors listed in this handbook are covered in the applicable specification (see 2.1). When it has been determined that circuit requirements cannot be met by using resistor styles or characteristics listed in the applicable specifications, the design engineer should, with the approval of the cognizant activity, select from the applicable resistor specification styles or characteristics not listed herein.【英文标准名称】:Railwayapplications-Track-Trackalignmentdesignparameters-Trackgauges1435mmandwider-Part1:Plainline;GermanversionEN13803-1:2010
【原文标准名称】:铁路应用设施.轨道.轨道线路平面图设计参数.轨距1435mm及更宽.第1部分:平行轨线.德文版本EN13803-1-2010
【标准号】:DINEN13803-1-2011
【标准状态】:现行
【国别】:德国
【发布日期】:2011-03
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:定义(术语);尺寸选定;外形;永存性铁路;铁路运输;铁轨;铁路应用设施;铁路建造;铁路设备;铁路轨道;铁道车辆;铁路;规范(验收);倾卸技术;公差(测量);划线;轮距;轨道(物料装卸设备)
【英文主题词】:Definitions;Dimensioning;Outline;Permanentways;Railtransport;Rails;Railwayapplications;Railwayconstruction;Railwayinstallations;Railwaytrack;Railwayvehicles;Railways;Specification(approval);Tiltingtechnology;Tolerances(measurement);Tracing;Trackwidths;Tracks(materialshandlingequipment)
【摘要】:ThisEuropeanStandardgspecifiestherulesandlimitsthatdeterminepermissiblespeedforagiventrackalignment.Alternatively,foraspecifiedpermissiblespeed,itdefineslimitsfortrackalignmentdesignparameters.
【中国标准分类号】:S11
【国际标准分类号】:93_100
【页数】:72P.;A4
【正文语种】:德语